J&M Bolt Together Chaser Bins…

  Designed with the operator in mind, the unloading auger is positioned in the
corner and extends toward the tractor cab, creating a closer, clearer view when
unloading grain.

 

  Properly balanced tongue weight reduces the stress on your tractor draw bar.

 

  Direct Drive Gearbox with Heavy Duty Driveline ensures performance and
minimizes horsepower requirement. No chains, sprockets, belts or pulley necessary
compared to dual auger cart designs.

 

  Different front and rear tank slopes allow the grain to move downward to a
single clean-out point at different speeds into the lower auger, creating a boiling
effect that prevents bridging in higher moisture grains. Chaser Bins with horizontal
floor auger have multiple clean-out doors and require much more time to clean-out.

 

  Unloading augers computer balanced to within One Ounce! Precision

manufacturing ensures a quiet running system that extends overall auger life and
performance by reducing vibration to the drive system.

 

  All J&M chaser bins feature thick flighting with a patented Super-Edge that puts
more material where it is needed, on the outer edge. In addition, we reinforce the
flighting at critical wear points to increase flighting life and durability.

     

 

 

SPECIFICATIONS

 

GC24t-1 (45,72 cm Auger)

 

GC31t-1 (45,72 cm Auger)

 

Capacity*

 

23,8 t (30,8 m3)

 

31,3 t (40,5 m3)

 

Auger, One Vertical

 

45,7 cm Diameter

 

45,7 cm Diameter

 

Unload Time**

 

2,1 minutes

 

2,8 minutes

 

Wheels (2)

 

27x32 or 30x32

 

27x32 or 30x32

 

Hubs (2)

 

10 Bolt

 

10 Bolt

 

Spindles (2)

 

11,4 cm Diameter

 

11,4 cm Diameter

 

PTO

 

1,000 RPM

 

1,000 RPM

 

Tires (2)

 

30.5x32 or 900/60R32 (176LI)

 

900/60R32 (185LI) or 76x50.00

 

Tongue Weight

Empty

Loaded

 

 

575 kg

1,700 kg

 

 

1,300 kg

1,900 kg

 

Total Weight (appox.)

 

4,900 kg

 

6,525 kg

 

 

DIMENSIONS

 

GC24t-1

 

GC31t-1

 

A

 

48,2

 

45,7

 

B

 

446 cm

 

574 cm

 

C

 

193 cm (standard)

221 cm (with HS-18)

235 cm (with HS-18XL)

 

237 cm (standard)

275 cm (with HS-18)

294 cm (with HS-18XL)

 

D

 

487,7 cm

 

670,6 cm

 

E

 

670 cm

 

901,7 cm

 

F

 

379 cm (standard)

412 cm (with HS-18)

429 cm (with HS-18XL)

 

410 cm (standard)

442 cm (with HS-18)

455 cm (with HS-18XL)

 

G

 

221 cm (standard)
259 cm (with HS-18)

276 cm (with HS-18XL)

 

181 cm (standard)

212 cm (with HS-18)

225 cm (with HS-18XL)

 

H

 

350,5 cm

 

370,8 cm

 

J

 

358,1 cm

 

358,1 cm

 

K

 

337 cm

 

353,1 cm

 

L

 

304,8 cm

 

289 cm to 304 cm

 

M

 

381 cm

 

380 cm to 431 cm

 

 

Tank Design Is Key To Excellent Cleanout

A common misconception is that all wagons are designed the same.
Therefore, it is assumed that the wagon with the greatest amount of
backslope will clean out better. This is not necessarily true.

 

Some competitor wagons rely solely on steep slopes and gravity for
unloading. With their design, the angle of slope becomes critical for
complete cleanout, especially in higher moisture grains. With these
designs, an extra degree of slope could make all the difference.

 

We take the design of the tank one step further. Not only are our wagons
engineered with a steep back slope, but we also utilize a Sump Design with
valley flats to maximize cleanout.

 

Valley flats don’t allow the grain to hang up in the corners of the tank while
the sump design “pulls” grain into the unloading chute.

 

Not All Wagons Utilize This Feature! This is why J&M gravity wagons
have built an excellent reputation for complete cleanout even in
high moisture grains!

 

 

 

 

 

SPECIFICATIONS

GW10t-1

GW15t-1

Capacity - Box*

10,5 t

14,7 t

Door Width

45,7 cm Diameter

45,7 cm Diameter

Chute Height

2,1 minutes

2,8 minutes

Hopper Construction

14 GA Steel

12 GA Steel

Taillights

Standard

Standard

Front Ladder

Standard

Standard

Center Dump Deflector

Optional

Optional

Running Gear

 

 

Spindles

6,35 cm Diameter

7,6 cm Diameter

Wheels

22.5x8.25 or 22.5x13.5 - 8 Bolt

22.5x13.5 - 8 Bolt

Spindles

6,35 cm Diameter

7,6 cm Diameter

Wheels

22.5x8.25 or 22.5x13.5 - 8 Bolt

22.5x13.5 - 8 Bolt

Spindles

6,35 cm Diameter

7,6 cm Diameter

Wheels

22.5x8.25 or 22.5x13.5 - 8 Bolt

22.5x13.5 - 8 Bolt

 

 

 

DIMENSIONS

GW10t-1

GW15t-1

 

A

375,9 cm

457,2 cm

 

B

218,4 cm

238,7 cm

 

C

279,4 cm

304,8 cm

 

D

208,3 cm

223,5 cm

 

E

261,6 cm

314,9 cm

 

F

238,8 cm

254,0 cm

 

G

546,1 cm

629,9 cm

 

H

38,1 cm

38,1 cm

 

Patented Uni-Swivel Hydraulic Augers

The patented Uni-Swivel Hydraulic auger design allows the auger to swivel to any

working position while maintaining a downwardly positioned discharge spout. The

adjustable hopper can fit virtually any door size. Unique pulley and track stabilizer

design allows the auger to stay in position and not pull to center.

 

 

MODEL USA-15 SPECIFICATIONS

Diameter

15,2 cm

Length

457,2 cm

Flighting

Steel or Poly-Cup Plastic

Hopper

Adjustable to fit almost any box

Auger Tube

14 GA seamless steel tube

Winch

Standard

Auger Pivot

Patented Uni-Swivel Design

Sump Design Hopper

Yes

Unload Height

335,2 cm (maximum); 213 cm (minimum)

Height of Auger in Saddle

304,8 cm

Maximum Swing Left and Right

1310 cm (with 3-Stage Telescoping Spout)

Maximum Unloading Distance Out

579,1 cm (with 3-Stage Telescoping Spout)

Discharge Rate (corn/soybeans)*

0,38 metric tons per minute

Discharge Rate (fertilizer)*

453,6 kg per minute

 

 

 

DIMENSIONS

 

Engine

Briggs & Stratton or Honda

 

Starter

Manual Pull or Electric

 

Engine Size

8 horsepower

 

Oil Resevoir

5 gallon

 

Mounting Frame

Standard

 

* Your rate may differ due to the quality of the material, the auger unloading height angle, and variable tractor hydraulic output.

NOTE: Always operate the auger system with a tractor hydraulic requirement of 9 gpm (minimum) to 15 gpm (maximum) (2,250 psi)